Qmobile G3 MT6261 Flash File CM2

Qmobile G3 MT6261 Flash File Readed by CM2MTK Step by Step Full Information.

 It has a good battery capacity and average display size, Dual sim for Gsm mobile networks, and also a memory slot. Good looking, and easy to use for common persons. 

Processor Is a MTK6261, MEDIATEK Family CPU.

Specification,

Sim:                               Dual Sim

Color :                            Black

Display :                        2.4 Inch

Memory Card:               Micro SD card, supported up to 32GB

Camera :                        2MP 

 Video & Audio Player: Yes 

Fm Radio :                     Yes

Audio :                           3.5mm Audio Jack, Speaker Phone

Tourch :                           Yes

Battery :                        3000 mAh Li-ion Removable 

Call:                              auto call recorder

Urdu language:             Yes

Messaging :                  SMS,MMS

High ring sound :               Yes

Very High ring Sound:      No

Price Rang: 19$

 

How to read a MEDIATEK CPU on CM2Mtk

1- Open the infinity Box module CM2MTK  

2-Open the first option, already default.

3- Go to the 'Flash' tab

4- Select/ remain lower right side options as default.

5- Press ' Read Full Flash ' on big horizontal button.

6- Connect the mobile in power off condition via USB cable with PC.

7- There is no boot key on Mediatek CPU normally. In future phones/keypad

 phones but Android phones may have boot key/ keys instead.

8- Remember, Mediatek drivers should already  be installed before any work

LOG

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...

Phone found! [ 8 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 983B0CE617CEBC296F122B255C8394BB

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_G3_V16-24-08-21.bin

FileVersion : QMobile_G3_V16-24-08-21

Saved to : C:\InfinityBox\CM2MTK\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_G3_V16-24-08-21.bin

Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

File ver:  FISE61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_G3_V16-24-                     08-  21.bin

You can get the original  CM2 readed Flash File From

HERE

Instructions before Flashing,

There are many similar mobiles models in the market at present, Every mobile file is different from the other and the flash file is not compatible with each other

Before flashing backup your mobile full firmware first.

After the flash, paste the original IMEI numbers, never use the flash file IMEI numbers

I will be not responsible if your mobile dead or unfunctional by this file.

Please read the instructions carefully.

If You have any problem, please leave a comment.

Disclaimer, 

Only use the original imei numbers, which are found on the back side sticker of the mobile, or dial on the keypad *#06#

Gsm Solutions is not responsible for any illegal usage. All the information is only for educational purposes.