E-Tachi B13 V2 Flash File SPRD SC6531E With Boot Key 100% Tested

 E-Tachi B13 V2 is a Bar Phone mobile, EMMC chip is Spreedtrum SC6531 Type,Dual sim,torch.1.7inch

display,and 1200mAh battery, have good and charming look.

  

Specification ;

Pakistan RS:1600:  10USD

Sim:                               Dual Sim

Color :                            Black

Display :                        TFT 1.77Inch

Memory Card:               Micro SD card, supported up to 32GB

Camera :                        2MP,LED Flash 

 Video & Audio Player: Yes 

Fm Radio :                     Yes

Audio :                           3.5mm Audio Jack, Speaker Phone

Touch :                           Yes

Battery :                        1200 mAh Li-ion Removable 

Call:                              Auto Call Recording 

Messaging :                  SMS,MMS

Flashing Requirement :

   1- Download and install Spreedtrum USB Drivers Latest 

   2- Desire Box or Dongle / Tool setup are installed on your PC

   3- USB cable / Bootable cable/ SPD bootable Cable 

Flashing Procedure 

1-Install the required SPD Drivers

2-Install the infinity box module "SCR...

3-Select the require TAB

4-Select Modle CPU type 

5-Select Function as/ Reas Flash /Write Flash /Formate etc...

6-Press & Hold the Boot Key and connect the USB cable to Mobile

E-TACHI B13 V2 SC6531E With Boot Key

LOG.

Card found : xxxxxxxxx , v0143

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.06

SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Read Flash [ v1.06 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.W17.43.4_Release

Project Version:   SC6531EFM_BAR

CT_SE218_F18228L_B1_Q18282L_B2_Q18285L_B11_A18206TS_B13_V2_E_TACHI_V02_0_20201019

BASE  Version:     BASE_SVN

HW Version:        SC6531EFM_BAR

10-19-2020 14:17:21

LOG Version:      V1.0.1

UCOM

Saved to : C:\Users\Mughal\Desktop\New folder\CT_SE218_F18228L_B1_Q18282L_B2_Q18285L_B11_A18206TS_B13_V2_E_TACHI_V02_0_20201019.bin

Done!

Elapsed: 00:00:56

Reconnect Power/Cable!

Technical Specification :

Brand; E-TACHI

Model: B13V2

CPU: Spreedtrum  SCL6531E

Boot Key(Verified ): Menu Key

(Verified mean: according to my search)

Boot Key (Google Search): Call key

You can try with (*,#,0,2+5,1,3,left key,Right key) Keys to detection.

You can use the Bootable cable instead of any key pressed

BOOT KEY in my Search is

    Menu key

File version name is

    CT_SE218_F18228L_B1_Q18282L_B2_Q18285L_B11_A18206TS_B13_V2_E_TACHI_V02_0_20201019

File you can get here

Caution, Before any operation,  First backup your mobile firmware.